1911 Disassembly and Cleaning Class
(Offered in Two Parts)

Part 1 – Field-Stripping:

Part 1 will cover everything necessary to field strip, clean and lubricate your 1911. This will include the removal of your firing pin and extractor.

Price: $40

Length: Approximately two (2) hours

Part 2 – Complete Take-Down:

Part 2 will cover the complete take-down, cleaning and lubrication of your 1911. Part 2 will begin where Part 1 leaves off. (Note: You must attend Part 1 in order to attend Part 2.)

After completing this class, you will be able to completely disassemble, clean, lubricate and perform all normal maintenance on your 1911.

Price: $110 Total for Parts 1 and 2

Length: An additional four and a half (4.5) hours
(Approximately six and a half (6.5) hours total for Parts 1 and 2)

Student Testimonial:

I am a newbee to owning a 1911. Especially, cleaning them. But, this class was
outstanding. They covered all three cleaning methods, materials and tools required
as well as techniques on verifying that the thing fires when you're done. There was
plenty of One-on-One instruction. It was well worth the money.

If you own a 1911 and you've never attended a class on this subject, you need to take
this class. If you think you know how to clean a 1911, you need to take this class.
Bottom line, if you own a 1911 you need to take this class.

I promise you will learn something new.

Don

Required Equipment:

All tools and products necessary for field-stripping, complete take-down, cleaning and lubrication will be available for purchase at the class. We strongly recommend the use of these products! (This is ESPECIALLY true if you plan to shoot competitively or shoot a lot of rounds per year.)

Additional items to bring with you:

Old Towel
Roll of Paper Towels
Q-Tips
Paperclip
Screw Driver or Allen Wrench for Your Grip Screws
Small Hammer
Small flat-bladed screwdriver
Small Trash Can
Your Owner’s Manual (if you have one)
Safety Glasses
Screw Driver or Allen Wrench for Magazine Release Button (on right side) -- for Part 2 class
Tweezers or small needle nose pliers -- for Part 2 class

Note: If you want to use your own tools and products, please bring the following with you to class:

For Part 1 – Field-Stripping:

High Quality Barrel Bushing Wrench
High Quality Cleaning Rod
Two (2) Bronze Bore Brushes for your Caliber
Cleaning Jag for your Caliber
High Quality Nylon Bristle Gun Cleaning Brush
High Quality Bronze Bristle Gun Cleaning Brush
Cleaning Patches
High Quality Solvent
High Quality Lubricant
Punch or tool to remove firing pin stop
Small Screw Driver or Tool to Remove Extractor (if you have an external extractor you will need the appropriate punch to remove the extractor pin)
Old Towel
Roll of Paper Towels
Q-Tips
Paperclip
Screw Driver or Allen Wrench for Your Grip Screws
Small flat-bladed screwdriver
Small Trash Can
Your Owner’s Manual (if you have one)
Safety Glasses

For Part 2 – Complete Take-Down:

All the Equipment Listed for Part 1 Plus the Following:
Small Hammer
Tweezers or Small Needle Nose Pliers
Screw Driver or Allen Wrench for Magazine Release Button (on right side)
Punch or Tool for Mainspring Pin Removal

Note:
We offer everything in the above lists for sale. We carry the products that we believe are BEST! If you need to purchase anything for maintaining your 1911 it will be available for sale at class time.

Revised: 11/23/15